Furniture Hardware: Januari 2013

Kamis, 31 Januari 2013

Bulk Hardware 150 x 100 x 4mm Self Adhesive Felt Pad (Pack of 2)

List Price:£5.04
Price: £4.79

Sorbothane Vibration Damping Sheet Stock 70 Duro 1/10" (2.54mm) x 12in (30.5cm) x 12in (30.5cm)

Superior Vibration Absorbing Ultra-Soft Polyurethane
Easy to Install - Can Be Cut to Shape
Absorbs Up to 94.7% of Vibration
Thickness Tolerance: +/- 0.015" (0.381mm)
Durometer: 70 Durometer (Shore OO) - Made in the USA

Isolate It! Sorbothane vibration isolator sheets are versatile anti-vibration pads that can be used as feet, stops, spacers and protectors in many different applications. The unique Sorbothane ultra-soft urethane is a durable, resilient, polymer that provides outstanding vibration isolation and non-skid properties. Sorbothane isolators help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. They feature a smooth, clean, black urethane surface. Use them on any audio and electronic equipment to prevent skipping and interference. More is not better. A large lightly loaded sheet will have a high spring rate and will not deflect enough to provide good isolation. Over compression will lead to short service life. The proper compression range is 3 to 20 per cent depending on the "Shape Factor." Shape factor is the ratio of contact surface (one side) divided by perimeter area. Geometry matters. Small circular pieces and rings "bulge" better than squares and rectangles. "Bulgeability" makes for better isolation. Use many small discs rather than a few large rectangles for best vibration isolation performance. Thickness matters. The thicker the sheet the lower the natural frequency. You need a sheet at least one-inch thick to get your natural frequency down to 10 Hertz. (10 Hertz is your target natural frequency for a 900 RPM motor.) Use the natural tackiness of Sorbothane or apply adhesives to glue the Sorbothane to metal plates on both sides or consider a custom design with molded-in stud mounts. This sheet is perfect for cutting to meet the needs of special applications or can be used whole. Can be cut with scissors or a sharp utility knife.Caution: This product contains plasticizer which may cause minor discoloration to wood, plastic, composite and other materials following prolonged contact.

List Price:
Price: £18.95

STRIP OF 3 RECTANGULAR FELT PADS SELF ADHESIVE 87MM X 19MM X 4MM ( 1 strip )

List Price:
Price: £2.27

Bulk Hardware Large Castor Cups with Felt Pad - Brown (Pack of 8)

List Price:£5.52
Price: £5.52

ajile EPG135-A Rectangular ribbed insert for tubes 35 x 20 mm - black (Pack of 12)

Polyethylene - black
For tubes with outside dimensions: 35 x 20 mm
Thickness of tube: 1.0 to 2.0 mm
Length (inside tube): 20 mm
Finishes, blocks, protects.

These plastic ribbed inserts close and protect rectangular tubes. They have a neat, professional finish, and are available in several colours. The inserts can bear significant loads without damage or cracking. They reduce slip, noise, vibration and damage. They are made by in France by technical experts in the plastic components industry, who ensure that the pieces are robust and durable: they can be used for chair feet, table feet and any other tube furniture or fitting.

List Price:
Price: £3.80

Bulk Hardware Large Castor Cups - Clear (Pack of 8)

List Price:£5.70
Price: £5.24

Rabu, 30 Januari 2013

Foam Furniture Pad Assorted Set - Black

Pack of 38 Black Foam Furniture Pads
Protect Your Floors and Work Surfaces
6 Different Shapes and Sizes
Also Available in Cream or White Sets - Each Sold Separately

Furniture Pads have a many uses, from keeping your floors and work surfaces from getting damaged, to make sure doors and windows do not slam shut. Each one is self adhesive packed, making them easy apply, 4mm deep and feature a ridged design for improved grip.The pack contains 38 Pads over 6 different sizes and shapes: 4x Large Square: 40mm x 40mm 9x Small Square: 25mm x 25mm 4x Large Circle: 38mm Diameter 6x Medium Circle: 32mm Diameter 6x Small Circle: 25mm Diameter 9x Extra Small Circle: 23mm Diameter Also Available in White or Cream Sets - Each Sold Separately

List Price:
Price:

Sorbothane Vibration Damping Sheet Stock 30 Duro 3/16" (4.76mm) x 12in (30.5cm) x 12in (30.5cm)

Superior Vibration Absorbing Ultra-Soft Polyurethane
Easy to Install - Can Be Cut to Shape
Absorbs Up to 94.7% of Vibration
Thickness Tolerance: +/- 0.020" (0.508mm)
Durometer: 30 Durometer (Shore OO) - Made in the USA

Sorbothane rubber square isolator pads that can be used as feet, spacers and protectors in many applications. The unique Sorbothane urethane is a durable, resilient, polymer that provides outstanding vibration isolation and non-skid properties. Installation is quick and easy with no need for drilling, riveting or press fitting push-in feet. Sorbothane bumpers help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. The smooth, clean, black urethane hemispheres serve as a modern and discreet rubber foot. Use them on trophies and desk-top items to act as a cushion and protect surfaces from scratching. Use them under audio and electronic equipment to prevent skipping and interference. Primary applications include feet for small appliances, DJ sound mixing boards, electronic equipment, phones, keyboards, speakers, desk accessories, printers, laptops, computers, multimedia projectors, DVD players and audio receivers. The rubber pads can be used as spacers/dampers for automotive computers and circuit board rigidity and vibration isolation. They also work great for separating stacked glass and metal sheets. Sorbothane hemispheres can be used as non-slip spacers on medical tabletops, electronic assemblies. They are also useful as spacers to help protect delicate printed circuit boards from vibration and heat build-up. Installation: Simply position the Sorbothane rubber disk and press it into place. The unique urethane material won't crack, dry, scratch or mar surfaces. It will last for years to protect and isolate your valued possessions. Can be cut to shape with sharp scissors or a utility knife. Ideal weight load is between 2000 and 3000 lbs per foot.This product contains plasticizer and may cause discoloration to surfaces.

List Price:
Price:

Sorbothane Vibration Damping Sheet Stock 30 Duro 3/16" (4.76mm) x 12in (30.5cm) x 12in (30.5cm)

List Price:
Price:

Master of Boards® Mobile Flipchart Easel Set | includes 100 sheets of flipchart paper, magnets and board eraser

Master of Boards® Flipchart Easel with mobile designer base suitable for office use
good colour contrast when writing
2 foldable side arms
height adjustable design (up to approx. 210 cm)
integral storage tray for pens

Top of the range mobile Flipchart suitable for frequent office use. The flipchart is fitted with a premium quality, highly stable round base (open at the front) with 5 swivel castor wheels, usually only seen on more expensive models. It is height-adjustable up to approx. 210 cm and comes complete with 2 foldable side arms. Mobile Flipchart with designer base, consisting of 5 swivel castor wheels, 3 with wheel stops 104 x 73 cm (writing surface), height-adjustable up to approx. 210 cm includes 2 folding side arms which significantly enlarge the writing surface Melamine rear panel, can be written on with dry wipe board markers specially-coated easy-wipe surface enables high-contrast writing magnetic, with integral storage shelf adjustable paper holder, suitable for most current flipchart paper blocks comes pre-assembled, for quick and easy constructionincludes magnets and magnetic board eraser Flipcharts remain one of the most popular and commonly-used mediums of presentation - ideal for meetings, presentations and moderating. Handwritten annotations, bullet points and diagrams assist in making your presentations more lively and animated. The drop-down list at the top of the page enables you to purchase the flipchart either without paper, or with 100 sheets of either plain or squared paper included (5 paper pads, each with 20 sheets).

List Price:
Price:

CASTOR CUPS FURNITURE FLOOR PROTECTOR GLIDES RUBBER NON SLIP 60MM ( pack of 8 )

This castor cup has an external diameter of 65mm at its widest the internal diameter is 60mm at the top which tapers down to 50mm at the flat base

This castor cup has an external diameter of 65mm at its widest the internal diameter is 60mm at the top which tapers down to 50mm at the flat base

List Price:
Price: £8.98

ajile - Round rubber ferrule - BLACK (Pack of 4) - furniture chair feet floor protector - 20 mm diameter

d = 20 mm | L = 27 mm (see images)
Reduces noise - makes your neighbours happy
Thick black rubber. Non- skid. Suitable for outdoor furniture
Protects your floor. Eliminates scratches and damage.
Manufactured in France

Protects the feet of tubular furniture legs: chairs, tables, stools, and other furniture. Reduces slip, noise, vibration and damage. The feet protectors are sold in packs of 4 so that you have exactly the quantity you need, without any unnecessary pieces left over. They are made by in France by technical experts who ensure that the pieces are of high quality, and are robust and durable.

List Price:
Price: £6.20

ajile - Round rubber ferrule - BLACK (Pack of 4) - furniture chair feet floor protector - 20 mm diameter

List Price:
Price: £6.20

Brass Castor Cups Max Internal diameter 48mm set of 8

Beautiful solid brass castor cups
Maximum internal width of 48 mm
Ready to use on carpets
For wood and other hard floors add 38 mm felt pad
Set of 8, other packs available

Brass Castor Cups These beautiful solid brass castor cups have a maximum internal width of 48mm and are ready to use on carpeted floors. If however you want to use them to protect wood or other hard floors just add the 38 mm adhesive felt bases.

List Price:
Price: £12.56

Selasa, 29 Januari 2013

2 x Black / silver ring 40mm wheel furniture castors with top fixing plate

40mm castor wheel.
Flat fixing plate design.
360° swivel for easy movement.

2 Brand new black 40mm castor wheels.These 40mm nylon wheel furniture castors with steel fixing plate rotate to a full 360 degrees. The castors are black with a silver ring. They are suitable for use on light domestic equipment, video stands, office furniture and display equipment.
We are offering you these castors at a fraction of retail price while stocks last.
Dimensions :
Wheel diameter......40 mm.
Size of swivel plate........ 30 mm(square).
Distance between fixing holes..... 22 mm.
Overall height (approx)..... 52 mm.
Gross weight..... 110 g.

List Price:
Price: £3.29

2.5" (6.35 cm) Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive 50 Durometer - 4-Pack

Reduce Vibration in Sensitive Equipment
Durometer: 50 (Shore OO) Supports between 45 lbs (20.41 kg)and 60 lbs (27.22 kg) per pad
Absorbs Upto 94.7% of Vibration
Easy to Install - 3M Peel and Stick Adhesive
Commercial Grade Anti-Vibration Pad - Made in the USA

Sorbothane rubber bumpers are pressure-sensitive adhesive-backed hemispheres that can be used as feet, spacers and protectors in many applications. Each rubber pad features aggressive, high-tack pressure-sensitive 3M 200MP adhesive with a release liner, making application fast and easy. The unique Sorbothane urethane is a durable, resilient, polymer that provides outstanding vibration isolation and non-skid properties. Installation is quick and easy with no need for drilling, riveting or press fitting push-in feet. Sorbothane bumpers help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. The smooth, clean, black urethane hemispheres serve as a modern and discreet rubber foot. Use them on trophies and desk-top items to act as a cushion and protect surfaces from scratching. Use them under audio and electronic equipment to prevent skipping and interference. Primary applications include feet for small appliances, DJ sound mixing boards, electronic equipment, phones, keyboards, speakers, desk accessories, printers, laptops, computers, multimedia projectors, DVD players and audio receivers. The rubber pads can be used as spacers/dampers for automotive computers and circuit board rigidity and vibration isolation. They also work great for separating stacked glass and metal sheets. Sorbothane hemispheres can be used as non-slip spacers on medical tabletops, electronic assemblies. They are also useful as spacers to help protect delicate printed circuit boards from vibration and heat build-up. Installation: Simply remove the protective backing liner, position the Sorbothane rubber hemisphere and press it into place. The unique urethane material won't crack, dry, scratch or mar surfaces. It will last for years to protect and isolate your valued possessions. Ideal weight load is between 45 and 60 lbs per foot.This product contains plasticizer and may cause discoloration to surfaces.

List Price:
Price: £23.95

4 Piece Furniture Sliders Glider Pads Glides

4 Pack Furniture Gliders
Rubber Pads Fit Under Legs of Furniture
Smooth Plastic Base Glides Over Floor

70mm diameter.

List Price:
Price: £1.90